roemegepen

Download Center

※ Download: Nikon sb 600 manual

O the sb 600 fires at specified output in the manual flash mode or at approx 1 16 output in the ttl auto flash mode b button pressing the b button for approx 03 second turns on the sb 600 and the indications appear on the lcd panel. If you use both controls, the exposure is modified by the sum total of both compensation values. Summary of the content on the page No.

First, consult the camera group table to see which group your camera belongs to. Note Lead-free solder is used all for this product. This mode cannot be set on the SB-600; it can only be set on the camera. For more information, refer to your camera instruction manual.

Nikon SB-600 user manual - Have Nikon spot-check your Speedlight regularly Nikon recommends that you have your Speedlight serviced by an authorized dealer or service center at least once every two years. YOU MAY NOT ASSIGN OR OTHERWISE DISPOSE OF, MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN, RESELL, DISTRIBUTE, NETWORK, OR CREATE OR HAVE CREATED DERIVATIVE WORKS BASED UPON THE MANUAL OR ANY PART THEREOF.

According to the camera and lens combination used with the SB-600, you can perform various types of TTL auto flash p. CLS is available only when the SB-600 is used with compatible Nikon cameras. First, consult the camera group table to see which group your camera belongs to. Then as you read the manual, you will find specific information on how to use the SB-600 with your particular camera. Blinks after the SB-600 fires at its maximum output in the TTL auto flash mode, indicating that the light may be insufficient. Two-button control function Press two buttons simultaneously to perform the following operations. The LCD panel illuminator also lights up when the Custom Settings mode is displayed. CPU Nikkor lenses Non-CPU Nikkor lenses AI-S Nikkor, AI Nikkor, Series E, etc. Do not test fire the Speedlight near your eyes. With a CPU lens, data such as focal length are... This is true of all cameras, except mechanical shutter cameras and when using the Auto FP High-Speed sync mode p. Flash shooting distance range in the TTL auto flash mode... Be sure to refer to your camera's instruction manual for specific information on camera settings and functions. For details, refer to your camera's instruction manual. ISO sensitivity factors For sensitivities other than ISO 100, multiply the guide number by the factors shown in the table below. Press the a button until G appears on the LCD panel. Determine the flash output level and aperture to match the flash shooting distance. If the number of continuous frames shot exceeds the value shown in the table, allow the SB-600 to cool off for at least 10 minutes. For details, see your camera instruction manual. If you use both controls, the exposure is modified by the sum total of both compensation values. This is useful for checking the illumination and the shadows cast on the subject before actually taking the picture. The slow-sync function cannot be set on the SB-600; it can only be set on the camera. For more information, refer to your camera instruction manual. This mode cannot be set on the SB-600; it can only be set on the camera. For more information, refer to your camera instruction manual. You cannot set the Auto FP High-Speed sync mode on the SB-600 directly, but must set it on the camera. You cannot set the FV Lock function on the SB-600 directly. Set it on the camera. No item appears when the settings are not available. Speedlights compatible with No limitation the TTL mode. If you do not follow this procedure, the SB-600 does not fire. Set up the on-camera Speedlight with CLS. Set up remote flash units A and B. Turn the power on, then confirm that the ready-lights come on. This function can be activated or canceled using the Custom Settings p. This is a good technique to use when shooting indoors, because you get more natural-looking pictures of people with softer shadows. To compensate, use a wider aperture or move closer to the subject and reshoot. The built-in wide-flash adapter diffuses the light from the flash to soften shadows. When the SB-600 is used off-camera, you can take more natural-looking close-up pictures. Gently pull out the built-in wide-flash adapter and position it over the flash head. Use either the SC-29, SC-28 or SC-17. Set the aperture using the lens aperture ring. You cannot set the white balance on the SB-600. Choose an appropriate white balance setting on your digital camera. After using the SB-600 near saltwater, wipe the flash unit with a soft, clean cloth moistened slightly with plain water to remove the salt, then dry it using a dry cloth. Never attempt to charge these batteries in a battery charger. Cause The SB-600 is not correctly attached to the camera. Printed in China TT4D00310202 11 8MSA1411--...

This Agreement constitutes the complete and exclusive agreement, oral or written, between you and Nikon. Close the battery chamber lid by sliding it into place while pressing down. · Autofocus flash operation in dim light. This is a good technique to use when shooting indoors, because you get more natural-looking pictures of people with softer shadows. With a CPU lens, data such as focal length are. Summary of the content on the page No. Install the batteries following the i and 2 j marks as shown. You cannot set the Auto FP High-Speed sync mode on the SB-600 directly, but must set it on the camera. Do not test fire the Speedlight near your eyes. Press to set the flash mode p.